CHEVROLET PERFORMANCE CONNECT & CRUISE KIT - SUPERCHARGED LT4 6.2L WET SUMP CRATE ENGINE W/ 4L75E AUTOMATIC TRANSMISSION

Maita Motorsports SKU: WMS-CPSLT44L75EWET-1

$28,185.57

Shipping calculated at checkout

Available Now!

When it comes to factory-engineered performance and convenience, nothing beats Chevrolet Performance's industry exclusive Connect & Cruise LT4 6.2L Wet Sump w/4L75E crate engine kit from Scoggin Dickey Parts Center. With one package you get the engine, transmission, electronic controllers and all the necessary wiring, engine and automatic transmission controllers.

Engine LT4 6.2L Wet Sump
Horsepower 640HP @ 6400RPM
Torque 630FT/LBS @ 3600RPM
Compression Ratio 10.0:1
Block Cast Aluminum with 6-bolt, Cross-Bolted Main Caps
Crankshaft Forged Steel, 3.622"
Heads A356T6 Rotocast Aluminum with 65.5cc Chambers
Valves 2.130"/1.590"
Camshaft Lift 0.492"/0.551" Hydraulic Roller
Dur. @ 0.050" 189°/223°

DESCRIPTION

Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out all the horsepower from them with total confidence. The specially calibrated controllers are designed for retrofit installation in older vehicles, for easier and quicker installation and operation, without the need for third-party tuning.

Some Engine Controller Kits will vary with the small components that are included due to variations in engine applications. Most ECM and Wiring Kits contain the following items;
  • Oxygen Sensors
  • O2 Sensor Mounting Bosses
  • Mass Air Flow Meter (MAF)
  • MAF Mounting Kit
  • Drive-By-Wire Throttle Pedal Assembly
  • Oil Pressure Sensor and Harness (NOTE: Some crate engines have the the sensor installed from the factory)
  • Complete Engine/ECM Wiring Harness with a Fuse Box
  • Fuel Pump Power Module
  • Fuel Pressure Sensor Kit
  • GM Fully Calibrated ECM
  • Detailed Instruction Sheet
  • INSTALLATION NOTES

    • Assembly does not include any electronics, Connect and cruise packages do.
    • Use LT4 Engine Controller Kit for engine operation, P/N 19331517
    • Flywheel included
    • Intended for pre-1976 street vehicles or any off-road vehicles
    • Not intended for marine applications
    • Crankshaft has 8-bolt flywheel mounting pattern
    • Engine includes direct injection, VVT and Active Fuel Management
    • Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine


  • INSTALLATION NOTES:

    Dry sump engine requires production or aftermarket oil lines and oil tank (not included)
    Flywheel included
    Intended for pre-1976 street vehicles or any off-road vehicles
    Not intended for marine applications
    Crankshaft has 8-bolt flywheel mounting pattern
    Engine includes Direct Injection and VVT

  • Fulfilled via Maita Motorsports